Core IoT Component Specifications & Performance
We provide the critical technical data engineers need to select the right components for their low-power, connected designs.
Wireless Modules: Details on pre-certified (FCC, CE, RED) modules including supported bands, protocols (e.g., LTE Cat-M1, NB2, BLE 5.2), output power, receiver sensitivity, and power consumption profiles (idle, active, sleep modes).
Microcontrollers (MCUs): Specifications for ultra-low-power MCU families, including core architecture (ARM Cortex-M series), clock speed, flash/RAM memory, number of GPIOs, and integrated peripherals (ADC, DAC, I2C, SPI, UART).
Sensors: Comprehensive data sheets for environmental (temperature, humidity, pressure), motion (accelerometer, gyroscope), optical, and proximity sensors, including accuracy, measurement range, output interface, and power requirements.
Power Management ICs (PMICs): Key specs for PMICs and battery charger ICs optimized for IoT, featuring high efficiency at low loads, multiple power rails, and integrated fuel gauges.
Antennas: Performance data for IoT-optimized antennas (chip, PCB, FPC) including frequency bands, gain, efficiency, and VSWR.
Target Industries & Vertical Market Solutions
Our components and expertise are applied to solve real-world problems across key IoT verticals.
Industrial IoT (IIoT) & Automation: Ruggedized components for factory sensor nodes, condition monitoring, predictive maintenance, and equipment tracking. Solutions emphasize wide-temperature operation, robustness, and long-term reliability.
Asset Tracking & Logistics: Components for GPS/GNSS trackers, leveraging low-power wide-area networks (LPWAN like LoRa, NB-IoT) and Bluetooth for geofencing, with ultra-long battery life.
Smart Agriculture & Environmental Monitoring: Solar-powered solutions with sensors for soil moisture, nutrient levels, weather conditions, and connectivity for large-area coverage in remote locations.
Smart City Infrastructure: Components for smart lighting, parking sensors, waste management, and air quality monitors, designed for public deployment and resilience.
Wearables & Medical IoT (IoMT): Miniaturized, ultra-low-power components for health monitors, fitness trackers, and medical devices, focusing on size, battery life, and data accuracy.
Our End-to-End IoT Electronic Manufacturing Services (EMS)
We transform your IoT concept into a manufacturable, reliable, and cost-effective product.
Design for Manufacturing (DFM) Analysis: Our engineers review your IoT PCB layout early on to optimize for cost, testability, and mass production, avoiding common pitfalls.
Prototyping & NPI (New Product Introduction): We manage the entire prototyping process, including component sourcing, PCB assembly, firmware flashing, and functional testing, to validate your design.
Firmware Flashing & Provisioning: Secure, in-line programming of MCUs and wireless modules. We can handle device provisioning for major IoT clouds (AWS IoT, Azure IoT, Google Cloud IoT Core).
Enclosure Design & Assembly: Full product integration services, including custom enclosure design, molding, and final assembly of PCBA, battery, antennas, and housing into a finished product.
Testing & Quality Assurance: Comprehensive testing, including in-circuit test (ICT), firmware functional test (FCT), RF parametric testing (using our partner network), and environmental stress screening (ESS).
Compliance, Security & Global Certification Support
Navigating the complex regulatory landscape is a core part of our value proposition.
Wireless Pre-Certification: We supply pre-certified wireless modules (FCC, CE, ISED, etc.), dramatically reducing the time, cost, and risk of your product's regulatory approval process.
Security Best Practices: Guidance on implementing secure boot, hardware-based encryption, and secure element integration to protect your device and data from inception.
Global Market Access: Our components and processes are designed to help you achieve compliance for your target markets in Europe, North America, Russia, and beyond (e.g., RED, FCC, PTCRB, TRC/RC).
Supply Chain Security: We mitigate the risk of counterfeit components through our authorized distribution network and rigorous incoming inspection processes.
The 365PCB IoT Partnership Advantage
We act as an extension of your team, providing the technical depth and manufacturing scale needed for IoT success.
Reduced Time-to-Market
Scalability from Prototype to Volume
We seamlessly scale with you, from building 50 prototypes to manufacturing 50,000+ units, ensuring consistency and quality throughout.
Total Cost of Ownership Optimization
Lifecycle & Obsolescence Management
Frequently Asked Questions (FAQs)
Q: Why should I use a pre-certified wireless module instead of a discrete chip?
A: Using a module saves 6-12 months of development time and significant cost associated with RF design, testing, and securing regulatory certifications (FCC/CE). It is the fastest and lowest-risk path to market for most IoT products.
Q: How do you help optimize an IoT device for battery life?
A: Our engineering team provides guidance on selecting ultra-low-power components, optimizing power architecture, and implementing firmware sleep modes. We can perform power profiling on prototypes to identify and eliminate power drains.
Q: Can you handle the secure provisioning of security keys for our devices?
Q: What is your experience with cloud integration for IoT devices?
A: We have experience assembling and provisioning devices designed to connect with major IoT platforms like AWS IoT Core, Microsoft Azure IoT Hub, and others. We ensure the device is built and programmed correctly to establish a secure connection to your cloud.
Q: We have a concept. Can you help with the full turnkey development?
A: Absolutely. While we excel at manufacturing, we partner with design houses and can manage the entire process—from component selection and PCB design to prototyping, certification, volume manufacturing, and logistics—providing a true one-stop-shop experience.
English
